Tapered End Mills

Best precision Tapered End Mills for sale

What material is best for end mills?
Two of the most common materials used in the manufacturing of end mills are high speed steel (HSS) and carbide. HSS is useful in older, slower, or less rigid machines as well as one off or very short run production.

Each side of the tapered end mills has 3 degrees taper.

With the tapered end mills, you are able to have better performance on the cutting process, including angular plunge grinding, full slotting, and right-angle slotting.

The helix angles of tapered end mills is 35 degrees. 

12% Cobalt content of tapered end mills can be used on the hardness of workpiece <55HRC. 

The cutting data of tapered end mill_10 mm diameter shank:

n =1900 (min), Slotted_Vf= 120 (mm/min), and Side_Vf=375(mm/min)

Other size diameter of cutting, please refer our cutting data of EMM2000T030.

*Reserve the right to modification due to technical requirements. 

*Please refer to the physical product.

The Cutting Data For EMM 2000T00 Series

Material	Steel、Stainless steel、Iron cast
Shank(mm)	n(min)	Vf(mm/min)
		Slotted	Side
4	4800	135	475
6	3100	120	325
8	2300	120	375
10	1900	120	375
12	1600	120	275
16	1200	120	275
Depth (D：F.D)